Sound Isolation Enclosures
( Broadcast and Vocal Booths, etc...)

Reducing sound to a Whisper since 1990!

 

19 Sizes Available
5-Year Warranty
Immediate Shipping

Affordable
 Standard & Enhanced Isolation   
Reconfiguration Capability

Customer Satisfaction


 

BACK

BASIC FEATURES


DOOR WINDOW

A door window is provided with each WhisperRoom. Multiple layers of 1/4" thick laminated safety glass are used. Laminated safety glass is used because of its superior noise reduction capability and safety features. If broken, it will not shatter! Air buffers are also built into the windows. This, and the fact that the weight/sqft of a window exceeds that of a solid wall component, helps to prevent noise transfer. The door window does not reduce the noise reduction capability of a WhisperRoom. It does, however, increase the amount of interior reflective surface area.
The chart below shows the difference between STANDARD and ENHANCED door window designs.


STANDARD Door Window Design:

	Size:		12" x 30" (30.48cm x 76.2cm)
	Thickness:	3/4"(19.05mm)	
	Design:		1/4"(6.35mm) laminated safety glass,
			1/4"(6.35mm) air,  	
			1/4"(6.35mm) laminated safety glass
	Weight:		5 lbs/sqft (24.46kg/m)

ENHANCED Door Window Design:

	Size:		12" x 30" (30.48cm x 76.2cm)	
	Thickness:	3 1/8"(7.94cm)	
	Design:		1/4"(6.35mm) laminated safety glass,
			1/4"(6.35mm) air,
			1/4"(6.35mm) laminated safety glass,			
			1 5/8"(4.13cm) air,
			1/4"(6.35mm) laminated safety glass,
			1/4"(6.35mm) air,
			1/4"(6.35mm) laminated safety glass	
	Weight:		10 lbs/sqft (48.92kg/m)
BACK

LIGHT

Lights shipped with WhisperRooms are intended to provide customers with basic startup lighting. It is understood that most customers will ultimately purchase and install lighting fixtures more suitable to their individual needs and desires. One or two lights are provided, depending on the enclosure size.

Note: Lights are UL approved.

( Light )

BACK


CABLE PASSAGE PLUG

Access for communications (microphone, headphone, speaker, etc...) and electrical cables is accomplished by way of slotted rubber plugs. Simply remove a plug, insert the cable and re-insert it into the wall. Two or more cable passage plugs are provided with each WhisperRoom and each will accommodate multiple cables. The number of plugs depends on the size of the unit. Also, an additional cable passage plug is located at the base of each optional window component.

CLICK PHOTO TO ENLARGE
( Cable Passage )

BACK


ACOUSTICAL FOAM

The entire interior surface of each WhisperRoom ceiling component and the base of the door are covered with pre-attached acoustical foam wrapped with cloth. Additional acoustical foam sheets ( 2' x 4' x 2" thick / weight of 2 lbs/cuft) with a pyramid design, are provided for the interior of each WhisperRoom. The number of sheets provided depends upon the size of the unit. Velcro strips are supplied for non-permanent attachment to the walls. This allows the user to tailor the interior acoustical environment to get the desired sound.


CLICK TO ENLARGE
( Acoustical Foam )

Flammability Data

- Class B Retardancy -
- Passes California Firecode Specification # 117 -
- Passes US DOT Specification MVSS-302 -
- Certified to U.S. Military MILP26514 Class II Grade C Specification -
- Flame Spread Index: 50 -
- Smoke Density Index: 260 -
- Charcoal Gray foam is classified SE (self-extinguishing) -
- Charcoal Gray foam is classified DNC (does not combust) -

NRC = .70

Absorption Test Data

 Frequency ( Hertz ):	125   250   500   1000   2000   4000 
Absorption:            .13   .27   .62   .92    1.02   1.02
BACK

VENTILATION

Effective air circulation is accomplished by acoustically engineered, detachable ventilation systems. Each system circulates air at a rate of 100 CFM (cubic feet per minute). The number of systems required depends on the size of the WhisperRoom unit. Each system mounts to an exterior wall surface and includes one(1) intake duct, one(1) exhaust duct and one(1) Remote Fan Unit (RFU). Each duct contains a series of baffles and acoustical foam wedges. This provides a treacherous path for sound to pass, while at the same time, allowing smooth air flow. To minimize vibrations, the RFU is non-rigidly attached to the exhaust duct by a flexible ducting hose. Fresh air is pulled into the room at floor level as a result of warmed air being pulled from the room at ceiling level. A wireless remote switch is provided with each WhisperRoom to control the ventilation system(s).

Standard ventilation systems are quiet. However, the fan noise is still slightly audible inside the WhisperRoom. If extremely quiet ventilation is required, Optional Ventilation Silencing Systems (VSS) are available.

NOTE:  Although we highly recommend that ventilation be included with each WhisperRoom, we understand that certain applications may not require it. For those situations, we offer units which are pre-configured for, but which do not include ventilation. If desired, one or more ventilation systems can easily be added at a later date.

CLICK TO ENLARGE
(MDL 102126S ( 8.5' x 10.5' )
Standard Ventilation Systems mounted on rear of unit

 

 
BACK